LINK CAN Connection Cable for G4X/G4+ WireIn ECUs (6 Pin CAN) (CANLTW) - 101-0211 MSRP: Was: Now: $50.00 Add to Cart
LINK CAN Connection Cable for G4X/G4+ WireIn ECUs (ECU Header CAN) (CANSS) - 101-0210 MSRP: Was: Now: $38.00 Add to Cart
LINK CAN Connection Cable for G4X/G4+ Plug-in ECUs (CANJST) - 101-0197 MSRP: Was: Now: $38.00 Add to Cart
LINK ECU Plugin G4X WRXLink V11 - WRX11X (2007-11 WRX & WRX/STI V11 EJ20/E25 Turbo) - 238-4000 MSRP: Was: Now: $1,750.00 Add to Cart
LINK ECU Plugin G4X S2000Link - S2000X (1999-05 Honda S2000 AP1) - 233-4000 MSRP: Was: Now: $1,650.00 Add to Cart
LINK ECU Plugin G4X MX5Link - MX5NB2X (2001-05 Mazda MX-5 NB) - 239-4000 MSRP: Was: Now: $1,350.00 Add to Cart
LINK ECU Plugin G4X MX5Link - MX5NB1X (1998-00 Mazda MX-5 NB1) - 240-4000 MSRP: Was: Now: $1,350.00 Add to Cart
LINK Ballast Resistor (BAL4) - 101-0013 For use with low-impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you are planning on using injectors with an impedance of less than 2 ohms... MSRP: Was: Now: $140.00 Add to Cart
LINK Ballast Resistor (BAL2) - 101-0012 For use with Low-Impedence Injectors. Includes set of 2 x 1 Ohm 50w resistors mounted to a heatsink. These are also sold in a single pack. Please contact us to ensure compatibility with your... MSRP: Was: Now: $110.00 Add to Cart
LINK Ballast Resistor (BAL) - 101-0011 For use with Low-Impedence Injectors. Includes a single 1 Ohm 50W resistor mounted to a heatsink. Please contact us to ensure compatibility with your injectors. MSRP: Was: Now: $99.00 Add to Cart
LINK Adapter M10 x 1 Female to 1/8 BSP Male - 101-0199 Stainless Steel thread adapter, M10 x 1 Female to 1/8 BSP Male, Adapts popular Bosch Metric Pressure Sensors to suit 1/8 BSP threaded ports. MSRP: Was: Now: $18.00 Add to Cart
LINK 8 Bar MAP Sensor EU (MAP8EU) - 101-0298 The 8 Bar MAP Variohm Eurosensor reads up to 7 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 7 Bar (or 101psi) of boost pressure. -... MSRP: Was: Now: $220.00 Add to Cart
LINK 5 Bar MAP Sensor EU (MAP5EU) - 101-0295 The 5 Bar MAP Variohm Eurosensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 4 Bar (or 58psi) of boost pressure. -... MSRP: Was: Now: $200.00 Add to Cart
Link CAN Gauge OLED 52mm - 101-0226 The Link CAN Gauge is a compact OLED gauge for displaying real-time data from your Link ECUs CAN stream. Supported parameters such as boost pressure, air/fuel ratio, coolant temperature, fuel... MSRP: Was: Now: $379.00 Add to Cart
LINK Deutsch DTM4 Connector Kit (Female) - 101-0225 Deutsch DTM4 Connector Kit (Female) to suit Link CAN Bus connections. Use to connect CAN devices into Link CAN bus. Includes Female Housing (Receptacle), Wedgelock & Pins MSRP: Was: Now: $11.00 Add to Cart
LINK Deutsch DTM4 Connector Plug Kit (Male) - 101-0156 Deutsch DTM4 Connector Kit (Male) to create your own looms. DTM4 Male housing. Includes wedgelock and sockets. MSRP: Was: Now: $11.00 Add to Cart
LINK CAN Keypad 12 button - 101-0239 Rugged 12 key CAN Keypad with interchangeable 15mm inserts (sold separately). Custom button inserts and configurable RGB indicator rings per button allow for extremely flexible set-ups. The keypad... MSRP: Was: Now: $439.00 Add to Cart
LINK CAN Keypad 8 button - 101-0237 Rugged 8 key CAN Keypad with interchangeable 15mm inserts (sold separately). Custom button inserts and configurable RGB indicator rings per button allow for extremely flexible set-ups. The keypad is... MSRP: Was: Now: $410.00 Add to Cart
LINK CAN Extension Cable 2m (CANEXT) - 101-0214 2 meter CAN Extension Cable for increased reach between your ECU CAN cable and CAN splitter/s or CAN device/s. Specs DTM4 Female to DTM4 Male. Includes CAN and Power Wiring. Length: 2 metres DTM4... MSRP: Was: Now: $47.00 Add to Cart
LINK CAN Splitter Cable (CANTEE) - 101-0212 CAN Splitter Cable for connecting an additional CAN devices. Use to connect from a CANJST, CANLTW or CANSS into 2 CAN devices. Specs DTM4 Female to 2 x DTM4 Male. Includes CAN and Power Wiring... MSRP: Was: Now: $47.00 Add to Cart
LINK CAN Connection Cable for G4X/G4+ WireIn ECUs (6 Pin CAN) (CANLTW) - 101-0211 Required to add CAN communication to WireIn ECU's which have CAN accessible via the 6 Pin round CAN connector on the front of the ECU. Compatible ECU's: G4X/G4+ Xtreme (CAN1) G4X/G4+ Fury... MSRP: Was: Now: $50.00 Add to Cart
LINK CAN Connection Cable for G4X/G4+ WireIn ECUs (ECU Header CAN) (CANSS) - 101-0210 Required to add CAN communication to WireIn ECU's which have CAN accessible via the Header. Compatible ECU's: G4X/G4+ Atom (CAN1) G4X/G4+ Monsoon (CAN1) G4X/G4+ Storm (CAN2) G4X/G4+ Xtreme... MSRP: Was: Now: $38.00 Add to Cart
LINK CAN Connection Cable for G4X/G4+ Plug-in ECUs (CANJST) - 101-0197 Used to add CAN communications to G4+/G4X Plugin ECUs which have a 5 Pin CAN connector. Plugs directly into the CAN socket on the ECU PCB. 12V and Ground via flying lead. Terminates to a DTM4 Male... MSRP: Was: Now: $38.00 Add to Cart
LINK Cable (CANJST4) - 101-0198 Required to add CAN communications & power to recently released G4X Plugin ECUs which have the new 4 Pin powered CAN connector (not the older 5pin CAN connector). Plugs directly into the socket on... MSRP: Was: Now: $40.00 Add to Cart
LINK Electronic Throttle Body Kit - 82mm (ETB82) - 101-0190 82mm Electronic Throttle Body - 82mm Bore size - Dual potentiometer redundancy - Bosch quality and performance - Includes groove on inlet port flange - Includes mating connector kit Technical... MSRP: Was: Now: $255.00 Add to Cart
LINK E-Throttle Accelerator Pedal Module (PED) - 101-0188 E-Throttle Accelerator Pedal Module - Firewall mounted hanging design - 16 degree (~70mm) travel - Redundant dual output potentiometers suitable for use with Electronic throttle bodies - Includes 6... MSRP: Was: Now: $195.00 Add to Cart
LINK Remote E-Throttle Module G4 (G4RET) - 115-1000 Link's external E-throttle (Drive by Wire) module works with all Link's G4X ECUs (except the entry level AtomX), plus all G4+ ECUs (Storm and above) to give you full control of your throttle setup,... MSRP: Was: Now: $325.00 Add to Cart
LINK ECU Plugin G4X WRXLink V11 - WRX11X (2007-11 WRX & WRX/STI V11 EJ20/E25 Turbo) - 238-4000 Easy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory... MSRP: Was: Now: $1,750.00 Add to Cart
LINK ECU Plugin G4X S2000Link - S2000X (1999-05 Honda S2000 AP1) - 233-4000 Easy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory... MSRP: Was: Now: $1,650.00 Add to Cart
LINK ECU Plugin G4X MX5Link - MX5NB2X (2001-05 Mazda MX-5 NB) - 239-4000 Easy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory... MSRP: Was: Now: $1,350.00 Add to Cart
LINK ECU Plugin G4X MX5Link - MX5NB1X (1998-00 Mazda MX-5 NB1) - 240-4000 Easy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory... MSRP: Was: Now: $1,350.00 Add to Cart