DESCRIPTION
This fiberglass product is manufactured using Anderson Composites proprietary vacuum infusion process. The resin is introduced into the mold as a liquid; final finish is matte black enamel.
FEATURES
- Fiberglass "skeleton" bonded to underside of fiberglass hood for strength and support (matte black enamel finish)
- Requires normal pre paint prep; including sanding and primer. Occasional surface blemishes may be present as a result of the manufacturing process. These blemishes are removed during the normal sanding and preparation process required when painting any vehicle body component.
- Mounts with OE hardware - Requires normal pre paint prep; including sanding and primer. Occasional surface blemishes may be present as a result of the manufacturing process. These blemishes are removed during the normal sanding and preparation process required when painting any vehicle body component.
- Mesh screen is removable and paintable
- All hoods require hood pins for safety reasons. Anderson Composites will not be liable for any damages to the product and the vehicle caused by not properly using hood pins - AeroCatch or Quic-Latch
- Heat shield required
- Always carefully close a composite hood. Slamming or dropping the hood may cause it to crack.
- Anderson Composites does not suggest re-installing gas shocks/dampers/struts
- The use of a hood prop rod is highly recommended
- Requires normal pre paint prep; including sanding and primer. Occasional surface blemishes may be present as a result of the manufacturing process. These blemishes are removed during the normal sanding and preparation process required when painting any vehicle body component.
SHIPPING NOTE:
Anderson Composites packs all products carefully to prevent damage during shipping. However, damage may still occur occasionally. Buyer must inspect the packaging and the products carefully upon receiving them, then accept the shipment and notate any damages and irregularities, such as crushed, torn, punctured, or broken parts on both the packaging and the product, on the freight bill or receipt at the drivers presence. Buyer must retain all cartons, packing materials, and damaged products for the carriers damage inspector to inspect. Do not refuse shipment or return it without approval, because the buyers right to make a damage claim may be denied. A signed receipt without any notation indemnified the carrier as well as Anderson Composites from any further damage claims. Discovery of damages after a clear delivery becomes the responsibility of the customer.
