DESCRIPTION
Anderson Composites VIP carbon fiber parts are manufactured by spraying a coat of resin on the mold, sheets of carbon fiber fabric are laid out across the mold and then a final coat of resin is applied on the fabric before being placed inside a vacuum sealed bag to cure (provides an excellent fabric-to-resin ratio). Once cured, the part is removed from the mold, trimmed and a final coat of gel coat applied and polished to protect the surface and increase the high luster finish. No additional clear coat is required.
FEATURES
- Replaces OE rockers, GT350 style
- Fits Bullitt, EcoBoost, EcoBoost Premium, GT, GT Premium, V6
- Type-GR splitters with deeper "planes" and "winglets" reduce lift by blocking air along the sides of the vehicle and reduces air from flowing underneath the Mustang.
- Reduced lift adds stabilization to the car during high-speed track driving and improves traction.
- Vacuum infused process with 3K, 2x2 twill carbon fiber cloth, gloss finish
- Mounts with OE hardware
- Does not include two (2) replacement 1/4" x 1/2" rivets (drill and rivet tool required)
- Requires side rocker panel to be removed, install carbon fiber splitters onto rocker panel, re-install as an assembly.
- Mounting tabs may require modifications for correct fitment; minor adjustments may be necessary as part of the normal installation process
- Additional clips and hardware may be required to optimize installation
- Lower mounting holes may be required to be enlarged
- Use trim & panel tool kit when removing OE rockers
- Underside may have have imperfections such as wavy weaves, small bubbles and clear finish blemishes
SHIPPING NOTE:
Anderson Composites packs all products carefully to prevent damage during shipping. However, damage may still occur occasionally. Buyer must inspect the packaging and the products carefully upon receiving them, then accept the shipment and notate any damages and irregularities, such as crushed, torn, punctured, or broken parts on both the packaging and the product, on the freight bill or receipt at the drivers presence. Buyer must retain all cartons, packing materials, and damaged products for the carriers damage inspector to inspect. Do not refuse shipment or return it without approval, because the buyers right to make a damage claim may be denied. A signed receipt without any notation indemnified the carrier as well as Anderson Composites from any further damage claims. Discovery of damages after a clear delivery becomes the responsibility of the customer.
