DESCRIPTION
Anderson Composites dry carbon fiber parts are manufactured by using pre-impregnated carbon fiber fabric and an autoclave. Pre-preg fabric is made by coating each specific weave with an appropriate amount of resin, this optimizes its strength and limits the amount of resin which significantly cuts down on weight. As a result, the prepreg is ready to lay into the mold without the addition of any more resin, vacuum sealed to remove all air between the fabric and mold and then placed into an autoclave to cure at high temperature and extreme pressure (removes impurities and strengthens the final product). Our dry carbon parts have a matte finish (aka dry) because the resin is not coated on the surface.
FEATURES
- Carbon fiber "skeleton" bonded to underside of carbon fiber hood for strength and support
- Functional air scoop works with Demon "Air-Grabber" intake system
- Fits 2008-2021 Challenger and 2015-2021 Hellcat
- 2008-14 Challenger requires windshield washer modification
- Dry carbon fiber - matte finish
- Autoclave process with pre-preg 3K, 2x2 twill carbon fiber cloth, matte finish
- Our DRY carbon does not have UV protection, it is recommended to have it coated with an automotive grade clear coat with UV inhibitors if you do not plan to paint or wrap the part
- Mounts with OE hardware, hinges and latch
- Hoods are hand crafted and weigh approximately 20 lbs. (stock hood weighs 30 lbs.)
- Small imperfections such as wavy weaves are inevitable due to the size and shape of the hood scoop.
- All hoods require hood pins for safety reasons. Anderson Composites will not be liable for any damages to the product and the vehicle caused by not properly using hood pins - AeroCatch or Quic-Latch
- Heat shield required
- Anderson Composites does not suggest re-installing gas shocks/dampers/struts
- The use of a hood prop rod is highly recommended
SHIPPING NOTE:
Anderson Composites packs all products carefully to prevent damage during shipping. However, damage may still occur occasionally. Buyer must inspect the packaging and the products carefully upon receiving them, then accept the shipment and notate any damages and irregularities, such as crushed, torn, punctured, or broken parts on both the packaging and the product, on the freight bill or receipt at the drivers presence. Buyer must retain all cartons, packing materials, and damaged products for the carriers damage inspector to inspect. Do not refuse shipment or return it without approval, because the buyers right to make a damage claim may be denied. A signed receipt without any notation indemnified the carrier as well as Anderson Composites from any further damage claims. Discovery of damages after a clear delivery becomes the responsibility of the customer.
