OVERVIEW
Edelbrock Remanufactured Performer Series 600 cfm, Square-Flange, Manual Choke Carburetor (non-EGR)
DETAILS
The Edelbrock 9905 Remanufactured Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 9905 Remanufactured Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to "hold a tune", so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that's reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
SPECS
| Barrel Quantity | 4 Barrel |
| Choke Type | Manual |
| EGR Port | No |
| Gasket Or Seal Included | Yes |
| Bore Diameter | Primary Bore 1.44; Secondary Bore 1.69 in |
| Main Venturi Diameter | 1.19 in |
| Metering Rod Size | .070 x .047 in |
| Spring Force | 5" Hg (Orange) |
| Primary Jet Diameter | 0.1 in |
| Series | Performer |
| Material | Aluminum |
| Finish | Satin |
| Maximum Flow Rating | 600 cfm |
| Body Height | 3.25 in |
| Booster Type | annular |
| Condition | Remanufactured |
| Hazardous Materials Warning | WARNING: This product can expose you to Zinc, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Flange Shape | Square |
| Secondary Jet Diameter | 0.095 in |
| Installation Notes | Electric choke #1478 can be added if needed; Recommended cubic inch displacement for big block dual quad applications is 396-502+ c.i.d.; Performer Series Carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000; Edelbrock carburetors are not calibrated for or compatible with alcohol, race or E85 pump fuel. The use of alcohol or E85 in your Edelbrock carburetor will damage your carburetor and void your warranty.; The use of a new fuel filter between the fuel pump and carburetor is required. Failure to do so will void the manufacturer's warranty of the carburetor |
