OVERVIEW
Edelbrock Remanufactured Marine Series 750 cfm, Square-Flange, Electric Choke Carburetor (non-EGR)
DETAILS
The Edelbrock 9910 Remanufactured Marine Series 750 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the harsh abuse only a marine environment can inflict. Several characteristics make the 9910 Remanufactured Marine Series 750 CFM electric choke carburetor an outstanding marine performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to "hold a tune", so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that is iridited and assembled with PTFE-coated shafts and pump arm for maximum protection. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that's reliable, user-friendly and is easily tunable for trouble-free operation.
SPECS
| Gasket Or Seal Included | Yes |
| Maximum Flow Rating | 750 cfm |
| Base Width | 5.937 in |
| Choke Type | Electric |
| Float Drop | 1 in |
| Body Color | Zinc-Dichromate |
| Linkage Attached | No |
| Main Venturi Diameter | 1.44 in |
| Mounting Hole Diameter | 0.355 in |
| Street Legal | No |
| Flange Shape | Square Bore |
| Adjustable Float Level | No |
| Metering Rod Length | 3.15 in |
| Marine Approved | Yes |
| Metering Rod Power Tip Diameter | 0.047 in |
| EGR Port | No |
| Mounting Hole Quantity | 8 |
| Inlet Fitting Thread Diameter | 0.625 in |
| Barrel Quantity | 4 |
| Float Material | Brass |
| Primary Jet Diameter | 0.113 in |
| Small Venturi Diameter | 1.56 in |
| Hazardous Materials Warning | WARNING: This product can expose you to Zinc, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Base Length | 6.25 in |
| Air Cleaner Flange Diameter | 5.125 in |
| Mounting Hardware Included | No |
| Body Height | 3.25 in |
| Body Material | Aluminum |
| Center Hung Floats | No |
| Grade Type | Performance |
| Spacer Included | No |
| Secondary Jet Diameter | 0.107 in |
| Float Level | 0.437 in |
| Installation Notes | Edelbrock carburetors are not calibrated for or compatible with alcohol, race or E85 pump fuel. The use of alcohol or E85 in your Edelbrock carburetor will damage your carburetor and void your warranty. These fuels can also damage other fuel system components, unless specifically designed for use with alcohol fuels; The use of a new fuel filter between the fuel pump and carburetor is required. Failure to do so will void the manufacturer's warranty of the carburetor |
