OVERVIEW
Edelbrock Remanufactured Performer Series EPS 800 cfm, Square-Bore, Electric Choke Carburetor (non-EGR)
DETAILS
The Edelbrock 9963 Remanufactured Performer Series 800 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 9963 Remanufactured Performer Series 800 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to "hold a tune", so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that's reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. Dyno tests proved that the EPS 800 carb outperformed a Holley #3310 carb out-of-the-box by 26 ft-lbs. of torque and 22 hp on a small-block Chevy engine equipped with an Edelbrock Performer RPM power package.
SPECS
| Hazardous Materials Warning | WARNING: This product can expose you to Zinc, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Base Length | 6.25 in |
| Air Cleaner Flange Diameter | 5.125 in |
| EGR Port | No |
| Marine Approved | No |
| Mounting Hole Diameter | 0.355 in |
| Street Legal | No |
| Choke Type | Electric |
| Adjustable Float Level | No |
| Main Venturi Diameter | 1.525 in |
| Linkage Attached | No |
| Body Material | Aluminum |
| Base Width | 5.937 in |
| Metering Rod Length | 3.15 in |
| Body Height | 3.25 in |
| Grade Type | Performance |
| Secondary Jet Diameter | 0.101 in |
| Metering Rod Power Tip Diameter | 0.047 in |
| Mounting Hole Quantity | 8 |
| Inlet Fitting Thread Diameter | 0.625 in |
| Barrel Quantity | 4 |
| Flange Shape | Square Bore |
| Float Material | Brass |
| Primary Jet Diameter | 0.113 in |
| Small Venturi Diameter | 1.63 in |
| Gasket Or Seal Included | Yes |
| Maximum Flow Rating | 800 cfm |
| Body Color | Satin Finish |
| Float Drop | 1 in |
| Mounting Hardware Included | No |
| Center Hung Floats | No |
| Spacer Included | No |
| Float Level | 0.437 in |
| Installation Notes | Performer Series Carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000; Edelbrock carburetors are not calibrated for or compatible with alcohol, race or E85 pump fuel. The use of alcohol or E85 in your Edelbrock carburetor will damage your carburetor and void your warranty.; The use of a new fuel filter between the fuel pump and carburetor is required. Failure to do so will void the manufacturer's warranty of the carburetor |
