OVERVIEW
Edelbrock #8894 Water Pump Gen IV LS Engine 2009-16 Ideal To Prevent Overheating In Street Rods And Street Machines
DETAILS
Edelbrock #8894 Water Pump for 2009-16 GEN IV LS engines (except Cadillac CTS-V) are ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these "super cooling" Water Pumps to provide maximum flow, maximum pressure and equal distribution to both sides of the block within 1%. Available for most popular applications, these high performance pumps flow in only one direction for optimum efficiency. The casting's computer-designed internal passages and precision powdered metal impeller produce the maximum flow rate possible.
SPECS
| Hub Height | 5.31 in |
| Impeller Material | Powdered Metal |
| Installation Warnings | Yes |
| Pulley Included | No |
| Thermostat And Housing Included | No |
| Fan Clutch Included | No |
| Impeller Rotation | Reverse |
| Impeller Vane Quantity | 6 |
| Related Cooling Fan Components | No |
| Includes Back Housing | Yes |
| Outlet Quantity | 1 |
| Hazardous Materials Warning | WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Housing Material | Aluminum |
| Mounting Hardware Included | No |
| Hub Hole Quantity | 6 |
| Mounting Hole Quantity | 6 |
| Water Pump Drive Type | Serpentine Belt |
| Casting Number | 8894 |
| Installation Notes | Incorrect alignment or an unbalanced condition puts excessive strain on the pump's shaft and/or bearing and will result in early failure of the shaft and/or bearing; The balance of the assembly depends primarily upon the concentricity of the fan clutch and spacers with the pump shaft; Concentricity is not assured when universal type clutches or spacers are used. Universal fan clutches and spacers have a 3/4" pilot hole, so an adapter must be used when installing a water pump with a 5/8" shaft, the adapter bushing is supplied with the unit; So special care must be taken to maintain concentricity with the shaft and the fan clutch. Failure to do so will void warranty; - The use of aftermarket (non-OEM) fan spacers are not recommended and will void the warranty of the water pump |
